Topband
[Top] [All Lists]

Topband: Radial installation >> using chain saw

To: <topband@contesting.com>
Subject: Topband: Radial installation >> using chain saw
From: n2fh@nerd.banm.com (Faris)
Date: Mon, 2 Oct 2000 15:35:53 +0100
I just installed an Inverted -L antenna in the trees and looking to =
install some radials on the grass lawn.  Can't install 1/4 wave (don't =
have the room) so some 1/8 wave are better than none.  I need to bury =
the radials due to lawn cutting, etc... I heard that someone was =
attempting to slit the lawn with an inexpensive electric chain saw =
(sounds like a good idea) worst case you just have to replace the chain.

If anyone has tried this method I would appreciate your experiences, =
comments or tips.

Tnx & 73 Faris

n2fh@nerd.banm.comor
RM10161@AOL.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • Topband: Radial installation >> using chain saw, Faris <=