Topband
[Top] [All Lists]

TopBand: AEA Complex Impedance Analyzer (and MFJ)

To: <topband@contesting.com>
Subject: TopBand: AEA Complex Impedance Analyzer (and MFJ)
From: nx1g@top.monad.net (Craig Clark)
Date: Mon, 22 Jun 1998 11:39:41 -0400
>Hi Dick and Dave and all,

>

>I'll post this because it's related to a common 160 complaint on 

>analyzers, any other responses will be e-mail only on this topic.

> 

>> >Has anything been done to increase the output signal level

>> >or include a filter in the MFJ-259?

>> >73, Dick -K5QY

>> 

>> 1) The Autek RF-1 has the same problem by the way.

>> 2) Does anyone know if the the new AEA unit also has the same

>> susceptability to external (AM broadcast band) signals? 

>> Dave


OK, I'm not an engineer but common sense suggests that a bandpass filter might 
help. The ICE 403 is for 1.8-2 MHz and the 402 cuts off all sigs below 1.8 MHZ.


Am I missing something here?


And, yes, RBS/RW sells them.


Craig




<bold>73 Craig Clark W1JCC


Radio Bookstore & Radioware

</bold>PO Box 209 - 47 Fitzgerald Rd

Rindge NH 03461

Orders: 800 457 7373 - 603 899 6957

         10am- 6pm EST

Fax:     603 899 6826

         24 hours, 7 days per week

email:   nx1g@top.monad.net

         radware@radio-ware.com

sites:   www.radio-ware.com

         www.radiobooks.com



--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>