Topband
[Top] [All Lists]

TopBand: BEVERAGE ANTENNA WIRE

To: <topband@contesting.com>
Subject: TopBand: BEVERAGE ANTENNA WIRE
From: nx1g@top.monad.net (Craig Clark)
Date: Sat, 31 Jan 1998 22:06:27 -0500
To: <topband@contesting.com>
>Date: Sat, 31 Jan 1998 08:55:39 -0500

>To: "BILL, VE3CSK" <<vertex@execulink.com>

>From: Craig Clark <<nx1g@top.monad.net>

>Subject: Re: TopBand: BEVERAGE ANTENNA WIRE

>Cc: topband@contesting.com

>In-Reply-To: <<199801310156.UAA26653@dayton.akorn.net>

>

>At 08:56 PM 1/30/98 -0500, you wrote:

>>I ran across what looks like a great source of very good wire for erecting

>>Beverage antennas.  With the days of "wired" communication all but done in

>>the military, large spools of telephone wire are beginning to show up on the

>>surplus market.  The stuff I found originally came on a roll of about a

>>mile, two conductor twisted (yes Herman-you must untwist it!).

>

>From memory of Signal School, Ft Gordon, Fall 1974 and Infantry Communications 
>Data ST-7-180 FY 72 here's some more info on this stuff.

>

>US Army telephone wire is called WD-1. It comes in a number of different ways 
>some easy to use, some a pain. There is another wire WD-36 called assault 
>wire. However in almost 20 years of doing wire communication, I never saw any 
>and wont reference it here.

>

>First of all, there are 7 wires per strand; 4 copper and 3 steel, two wires in 
>a twisted pair.  The coating is a heavy duty extruded plastic over nylon. The 
>wire weighs 48 pounds per mile and has a maximum tensile strength of 200 
>pounds (both wires.)

>

>Wire comes in a number of ways. The DR-8 is preferred as it is a reel of wire 
>and carries 400 meters of WD-1. We called these Drag-eights. The second way 
>you might find wire is on a MX-306 "doughnut" and this has 800 meters of wire. 
>You'd only find these from a warehouse as once they are used, you throw them 
>away. I suspect that most wire will be found on a RL-159 metal drum that holds 
>almost 1600 meters of wire. This is a heavy spool but I don't remember the 
>weight.

>

>We used the DR-8 and "doughnuts" to lay the wire but recovered it on to 
>RL-159s. We'd take the wire back to base and make up new DR-8's or just use 
>the RL-159s if we were laying out long runs. 

>

>When you strip this wire, be VERY CAREFUL of the steel wires. They are like 
>needles and will puncture your skin quite efficiently to the depth you have 
>stripped the wire. Most army lineman I knew had many punctures in their 
>thumbs! 

>

>Hope this helps. I saw some at the Rochfield Flea Market in NH a few years ago 
>but the guy wanted far more than it was worth. That's all I have ever seen.

>

>BTW, this wire would be great for a radial system too!

>

>73 Craig

>

>

<bold>Radio Bookstore & Radioware

</bold>PO Box 209 - 47 Fitzgerald Rd

Rindge NH 03461

Orders: 800 457 7373 - 603 899 6957

         10am- 6pm EST

Fax:     603 899 6826

         24 hours, 7 days per week

email:   nx1g@top.monad.net

         radwar@radio-ware.com

sites:   www.radio-ware.com

         www.radiobooks.com



--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>