At 08:40 AM 11/6/97 -0500, you wrote:
> Hi, Phil. Quick question re core mix... For some reason, I
>thought that the mix basically defined the top frequency end, to avoid
>hysteresis loss, and the LF end wasn't affected much by mix. Don't have
>my ref materials here at work, so cannot find info. Your inputs, pls...
>73- George, W4BUW
Hi George,
Amidon offers nine mixes for powdered iron:
Mix 26........ D.C. to 1.omhz
Mix 3......... .05-.5 mhz
Mix 15........ .1-2.0 mhz
Mix 1......... .5-5 mhz
Mix 2......... 1-30 mhz
Mix 6......... 3-50 mhz
Mix 10......., 5-100 mhz
Mix 12/17..... 20-200 mhz
Mix 0......... 50-300 mhz
For ferrite, there are 10 mixes:
Mix 43........ .01-1 mhz
Mix 61........ .2-10 mhz
Mix 63........ 15-25 mhz
Mix 67........ 10-80 mhz
Mix 68........ 80-180 mhz
Mix 72........ .001-1.0 mhz
Mix 75........ .2-15 mhz
Mix 77........ .001-1 mhz
Mix F......... .001-1.0 mhz
Mix J......... .001-1 mhz
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|