Topband
[Top] [All Lists]

TopBand: Re: [AMPS] 2N5109 preamp

To: <topband@contesting.com>
Subject: TopBand: Re: [AMPS] 2N5109 preamp
From: km1h@juno.com (km1h @ juno.com)
Date: Fri, 19 Sep 1997 19:46:54 EDT
Topbanders;

The 2N5109 is an ultralinear CATV device and circuits have been around
for several (over 10) years. This is the same device I have used for
years in many, many preamp and QRP projects.  Cost is a whopping $1.75
each or so. 

One of the best circuits is the lossless feedback design that was
patented by Anzac maybe 20 + years ago. It was copied in the HRM VHF
colums back in 1986 or so. A 2N5109 will have  1.5dB NF and 10dB of gain
with a IP3 of +11dB AND cover 1.5-150MHz in that circuit. 

Tom's suggestions are something many should try.....I have not used the
2N5109 in a PP amp but experiments with a pair of U-310's in a 2 turn
loop have been most gratifying. As he said..it is fairly bullet proof as
compared to a monolithic device. 

The bottom line is to experiment...not blindly follow some ad in some
magazine or whatever. 
Anyone wanting a schematic of the Anzac circuit  give me your address.  

73  Carl   KM1H


 -
 ---
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • TopBand: Re: [AMPS] 2N5109 preamp, km1h @ juno.com <=