Hi Jim:
My 80 mtr sloper is 1/4 wave of copper wire insulated from the tower, fed
with RG-213 and the shield clamped to the tower leg.
I cut it for 3510kHz and to work ssb I use a Nye-Viking MBV-A tuner.
Yes it did change the tuning of my 160 mtr shunt feed. But the nice thing
about using an omega match, it was easy to retune it for a 1:1 vswr. I also
have a 40 meter inverted-vee at about 75 feet.
I think that an elevated feed for 80 would work fine but mess up the 160
operation. Maybe someone has tried it ?
73 de Price W0RI
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|