>John, the TS930 has a separate receive antenna jack on the rear panel.
>Plug the bev. in there and throw the slide switch next to it. The radio
>does the rest.
Wrong - that plug diverts the antenna to a second receiver - it
does not provide for external antenna input.
To get into the receive loop on the ts-930 you need
to use the transverter din connector.
BTW - some 930s that I have seen have been modified so that
the plug that Brad is talking about does do what he describes
but this is *not* how it comes from the factory.
(I bought one new - still have it - I have used *ALOT* of diffrent ts930s)
--
George Fremin III
Austin, Texas C.K.U.
The operator formerly known as WB5VZL
512/416-7010
geoiii@bga.com
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|