Topband
[Top] [All Lists]

TopBand: Loaded Beverage

To: <topband@contesting.com>
Subject: TopBand: Loaded Beverage
From: W8JITom@aol.com (W8JITom@aol.com)
Date: Mon, 16 Sep 1996 20:14:41 -0400
I received about a dozen E-mails asking for the size of the coils. The coil
reactance will vary quite a bit with the impedance of the antenna. 

When I was experimenting with my loaded Beverages it was in the 70's, and the
data is long gone. I used sampling probes and a Vector Voltmeter to measure
phase delay (with some long matched lines) and it would be unlikely that
anyone could duplicate that.

As I recall the coil reactance was around 800 ohms at 2 MHz, the termination
impedance was well over 1000 ohms, and the wire was #16. Someone may try
modeling this, with loads spaced every 1/8 wl.

Series inductive loading raises the impedance and slows the velocity of
propagation in the wire. The slower velocity of propagation increases the
directivity.

Sorry, but it was an antenna I never kept many notes on.

73 Tom

--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>
  • TopBand: Loaded Beverage, W8JITom@aol.com <=