for informational purposes, here's direct link to order the old A9 kit:
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=b2c77f6165
On Mon, Jan 23, 2023 at 1:45 PM Barry N1EU <barry.n1eu@gmail.com> wrote:
> I've been "out of the loop" for quite a while, but I was involved with
> this years ago. I believe you have the encoder part number correct:
> https://www.mouser.com/ProductDetail/652-PEC11L4225FS0015
>
> This was the original A9 capacitor replacement kit:
> qty 2: https://www.mouser.com/ProductDetail/667-EEU-FR1H101B
> qty 3: https://www.mouser.com/ProductDetail/647-UTT1H100MDD - no longer
> stocked
> qty 3: https://www.mouser.com/ProductDetail/667-EEU-FR1J471B
> qty 1: https://www.mouser.com/ProductDetail/667-EEU-FR1E101 - no longer
> stocked
>
> 73,
> Barry N1EU
>
>
> On Mon, Jan 23, 2023 at 11:29 AM Bob, W3IDT <w3idt@comcast.net> wrote:
>
>> Mouser Electronics had (or used to have) an Orion II upgrade kit.
>> It included caps for the A9 power board, the battery, and a bunch of
>> encoders. Can't find a single part number now for the package.
>>
>> But the encoders are p/n 652-PEC11L 4225FS0015 as best I can read the
>> small print.
>>
>> The caps were used by K2KP to update my A9 board, though I seem to have
>> some leftover as well. I have not used the encoders, though my RIT/XIT
>> encoder doesn't work.
>>
>> Bob, w3idt
>>
>> .......
>> . Robert F. Teitel, W3IDT
>> .
>> . w3idt@comcast.net
>> . w3idt@arrl.net
>> ........
>>
>> On 1/22/2023 7:01 PM, dukeshifi wrote:
>> > OK Ralph.
>> >
>> > Still, it’s always good to hear from you.
>> >
>> > 73
>> >
>> > Gary
>> >
>> >> On Jan 22, 2023, at 6:00 PM, Ralph Covington <
>> ralph.covington@hotmail.com> wrote:
>> >>
>> >> Thanks Gary, but I’ll pass this time. Sorry to have taken up your
>> time. My Orion II and Herc II are fb now. I’m 85 and I think they’ll be
>> okay until I make the long trip.
>> >> vy 73, de Ralph in Reno. 🖖. …_._
>> >>
>> >> Get Outlook for iOS<https://aka.ms/o0ukef>
>> >> ________________________________
>> >> From: TenTec <tentec-bounces+ralph.covington=
>> hotmail.com@contesting.com <mailto:tentec-bounces+ralph.covington=
>> hotmail.com@contesting.com>> on behalf of dukeshifi <
>> dukeshifi@comcast.net <mailto:dukeshifi@comcast.net>>
>> >> Sent: Sunday, January 22, 2023 2:31:05 PM
>> >> To: Discussion of Ten-Tec Equipment <tentec@contesting.com <mailto:
>> tentec@contesting.com>>
>> >> Subject: Re: [TenTec] orion 2
>> >>
>> >> There is a guy on eBay selling some he claims are original. They ar en
>> to but they look to be correct other than the wrong color and brand.
>> >>
>> >> I have some Bournes encoders that are new. I modify them because they
>> come with detents, which you do to want. It takes 5 to 10 minutes each for
>> me to do each so I need to get $15 each for them.
>> >>
>> >> Once you go to the work to remove the encoder board, you might as well
>> replace all of the encoders because it is a lot of work to get this board
>> out. Also, you need a really good solder puller to get the old ones off the
>> board. I generally cut the leads off the old encoders and remove each lead
>> one-at-a-time, then clear the holes with the solder puller. Do NOT tug very
>> hard on the pins, make sure the solder is fully melted or you will pull
>> traces off the board and these are almost impossible to repair.
>> >>
>> >> Let me know if you want mine or go searching for the ones on eBay.
>> >>
>> >> 73
>> >>
>> >> Gary
>> >>
>> >> W0DVN
>> >>
>> >>> On Jan 22, 2023, at 3:31 PM, Peter <prheide@wxs.nl> wrote:
>> >>>
>> >>> I need some encoders (multi, cut /pbt/bw, main af , sub af , rit/zit)
>> for my TT orion 2.Does anybody know the brand or type and where to get them
>> ?
>> >>> Not all of them are broke, but some spare ........
>> >>>
>> >>> best regards Peter PD0FGQ
>> >>>
>> >>> --
>> >>> Disclaimer
>> >>>
>> >>> De informatie in dit e-mailbericht, inclusief eventuele
>> >>> meegezonden bestanden,is uitsluitend bestemd voor de geadresseerde.
>> >>> Openbaarmaking aan derden, in welke vorm dan ook, is alleen toegestaan
>> >>> na toestemming van P.R.van der Heide.
>> >>> Ontvangt u dit bericht maar bent u niet de geadresseerde
>> >>> van deze e-mail, dan dient u het bericht definitief te verwijderen
>> >>> uit uw systeem en bestanden. P.R. van der Heide aanvaardt geen
>> >>> aansprakelijkheid voor schade, van welke aard ook, die verband houdt
>> >>> met risico’s verbonden aan het elektronisch verzenden van berichten.
>> >>> P.R.van der Heide/First Media Products/Certified Pro Audio Engineer
>> >>>
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> TenTec mailing list
>> >>> TenTec@contesting.com
>> >>>
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
>> >>
>> >> _______________________________________________
>> >> TenTec mailing list
>> >> TenTec@contesting.com <mailto:TenTec@contesting.com>
>> >>
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
>> >> _______________________________________________
>> >> TenTec mailing list
>> >> TenTec@contesting.com <mailto:TenTec@contesting.com>
>> >> http://lists.contesting.com/mailman/listinfo/tentec
>> >
>> > _______________________________________________
>> > TenTec mailing list
>> > TenTec@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|