TenTec
[Top] [All Lists]

Re: [TenTec] Omni-VI+, No Xmit on 15m & 17m

To: "mail@ecrites.com" <mail@eCrites.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni-VI+, No Xmit on 15m & 17m
From: MadScientist <dukeshifi@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 26 Apr 2019 22:22:06 -0500
List-post: <mailto:tentec@contesting.com>
The low pass filter board shares the same relays on 15 and 17 meters. 

Was you describe is exactly what one would expect if one of the 15/17 meter 
relays (K4 or K5) was not making connection.

Gary

> On Apr 26, 2019, at 6:50 PM, Jim C <1291jim@gmail.com> wrote:
> 
> Here are the symptoms.  Thanks for your advice in advance!
> 
> 
> 
> *     All is well except for 15 and 17
> *     On these bands, No transmit, but receive is fine
> *     No indication of power-out on rig meter or outboard watt-meter, CW &
> SSB.
> *     CW Tone sounds normal until I increase the power dial to the 3pm
> position, about 70%, then the tone starts to flutter es Chirp.  But still no
> power out.
> 
> 
> 
> No other issues with the rig on all other bands.
> 
> 
> 
> 73,
> 
> 
> 
> Jim
> 
> W6JIM
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>