thanks!
> On Apr 16, 2019, at 9:50 PM, Don Rasmussen via TenTec <tentec@contesting.com>
> wrote:
>
>
> Also Dale - the Corsair II keyer is also controlled by the display circuit,
> so, if you see that the display is in error, and the CW paddles dont operate
> the keyer properly, you can be pretty certain it is because the electrolytic
> that boots the microprocessor at power up is faulty. If the keyer works, your
> problem is something else.
> de Wb8yqj Don
>
>
> Hi Dale,The Corsair II display has a microprocessor that is "booted" at power
> up using a small capacitor that is mounted on the board. I had one of these
> leak fairly obviously and all was fixed after I located and replaced the
> electrolytic. Access the display board behind the LED digits. de Wb8yqj Don
>
>
> My digital read out has started to do several things. It intermittently
> freezes
> on one frequency and won’t respond to the PTO or the band switch. I turn the
> radio off
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|