TenTec
[Top] [All Lists]

[TenTec] Eagle 599 - 15 Meter Preselector

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] Eagle 599 - 15 Meter Preselector
From: David Goncalves <davegoncalves@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 13 Mar 2019 08:24:16 -0400
List-post: <mailto:tentec@contesting.com>
I have an Eagle that seems to have lost 15 meter performance (all other
bands are OK) in between shipping from me to a buyer. The only obvious
thing I can see is that there is a slug missing from one of the
transformers on the preselector board for the 15 meter circuit. Everything
else logically points to a specific issue on the preselector circuit for 15
meters and little else - all other bands are unaffected, receive
performance is OK when in general coverage mode outside 15 meters, no
change when tuner turned off.

What I am wondering is if that circuit might normally be built without a
slug in one of those transformers, if the slugs normally rest a bit high on
these transformers. If something SHOULD be there, I'd be interested in a
source as well, beyond sending the whole radio over to Ten Tec Service.

Thanks,
-- 
David Goncalves
W1EUJ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Eagle 599 - 15 Meter Preselector, David Goncalves <=