Well my general and first approach is a Master Reset which you've done.
The next suggestion is clean all connectors inside the radio.
Do so one connector at a time, unplug the connector/cable, apply contact
cleaner to a Q-Tip and scrub the male pins. Then plug the connector on
and off a couple of times to wipe the female contacts. Do this one
cable end at a time until all are done.
>>>> NEVER spray anything into the radio. <<<<
If this doesn't work, you may have a bad display or display driver.
Thus contact Tentec by e-mail; SERVICE@TENTEC.COM. Let them know what
model radio and what problem you are having. They will likely suggest it
being sent to them for repair.
73
Bob, K4TAX
On 10/13/2018 2:17 PM, Michael Goins wrote:
Needing help, please.
The Omni here is very new to me and I'm having a display issue.
Tried a master reset and still have pixelation/fuzzy issues with the
display on the Omni here. If this has happened to anyone else, please let's
talk. New to me and sees to work fine - make contacts, great audio, etc. -
just almost unreadable.
Photo s too large for here. Will send to anyone who can maybe help. Thanks.
Mike, k5wmg
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|