I have a similar issue with my V.9. When I first turn it on, it will be fine
then recv audio will drop out. If I leave it on for 15 or 20 min, recv audio
becomes normal again and is fine the rest of the day.
I sent mine to steve Yudell in Florida and he had it for a couple of weeks and
it worked fine for him after he went through it. Now that I have it back it has
started doing it again. I just don’t feel like boxing it up and sending it
back. I am just going to live with it.
If you find out what the problem is, let me know.
Robert
KG4KGL
> On Sep 29, 2018, at 15:40, arsn4dd@charter.net wrote:
>
> Is there an Omni V mechanic in the house? My radio is going to need
> one if it doesn't straighten up... HI HI
> I have a very sparingly-used Omni V.9 that has developed an
> intermittent receive issue. From a cold start, the radio powers up and
> operates properly. After some random period of time, I can power cycle
> the radio, and as a result, I lose receive signals. I retain plenty of
> audio, and plenty of what sounds like band noise, but there no signals
> anywhere. I can leave the radio off for a couple of minutes, power it
> up, and the signals return. Before the suggestion is floated, I have
> exercised every connection in the radio with DeOxit. I have tightened
> and re-tightened every screw on every board in the radio. I have not,
> however re-seated any of the chips. Is there enough information here
> to generate suggestions? I admit to being mostly an appliance
> operator, but I might be capable of doing a few diagnostics. Thanks in
> advance for any guidance.
> Best Regards to all!
> Dennis N4DD
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|