FWIW..
My numbers are on the far right column.
Using the TenTec dummy load and reading
the watt meter on my Palstar AT1KM tuner:
1.900 Mhz 110 Watts 110
3.750 Mhz 120 Watts 110
7.150 Mhz 110 Watts 100
10.125 Mhz 110 Watts 100
14.175 Mhz 110 Watts 92
18.110 Mhz 105 Watts 90
21.225 Mhz 95 Watts 87
24.930 Mhz 90 Watts 85
28.050 Mhz 80 Watts 82
28.500 Mhz 75 Watts 82
29.000 Mhz 70 Watts 80
29.650 Mhz 65 Watts 80
Using Old Jupiter with Rev 1.33 b3.
> On Apr 15, 2018, at 12:16 PM, Gary Hendricks <k4mt1950@charter.net> wrote:
>
> I was looking at purchasing a jupiter as a backup rig. Here is the power
> output per band
>
> 1.900 Mhz 110 Watts
> 3.750 Mhz 120 Watts
> 7.150 Mhz 110 Watts
> 10.125 Mhz 110 Watts
> 14.175 Mhz 110 Watts
> 18.110 Mhz 105 Watts
> 21.225 Mhz 95 Watts
> 24.930 Mhz 90 Watts
> 28.050 Mhz 80 Watts
> 28.500 Mhz 75 Watts
> 29.000 Mhz 70 Watts
> 29.650 Mhz 65 Watts
>
> Is the power drop off above 21 MHz look normal?
>
> Gary K4MT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|