The Orion notch is fully adjustable in frequency. It is not just for
two frequencies.
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com
On 7/20/2017 5:54 PM, rick@dj0ip.de wrote:
Dave,
That is only because Rob Sherwood worked long and hard on Ten-Tec and FLEX to
fix their problems. When they originally shipped, neither were any good at
blanking electric fences.
We all owe Rob a huge amount of gratitude for the many years of service he has
given us.
73
Rick, DJ0IP
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of David W
LeJeune, Sr
Sent: Thursday, July 20, 2017 9:48 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] notch filter for Eagle?
I have an electrical fence next door. Both the noise blanker in my Orion II
and the one in my Flex 6500 easily take out that type of noise as well as
ignition noise. The Orion has a manual notch filter (sort of). It's really a
fixed freq notch at either 300 hz or 1050 hz. You can use that with CW and the
RIT - move the interfering hetrodyne inside of the selected notch. Of course,
you have to accept the change in the pitch of the CW signal.
Dave WN5V
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of rick@dj0ip.de
Sent: Thursday, July 20, 2017 9:36 AM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] notch filter for Eagle?
Gary,
Your Pro 2 of course is ancient history now. Was a great radio in its day.
Manual notch filters are fine on CW because "we" use our brain to notch the
disturbance and not the desired frequency. The auto-notch can't tell the difference.
Regardless of what it can and can't do, if it dies, you probably won't even get
spare parts for it. And brand new radios are no longer coming with manual
notch filters (except for the old stock sitting on shelves and being offered at
dumping prices to get rid of it).
If my memory serves me right, that was still one of the radios with a useful
noise blanker for blanking out electrical fences. None of the new DSP noise
blankers can do that as well as the old noise blankers.
There certainly were advantages in the older radios but we will probably only
see one more new radio come out in Japan with that old technology...at the end
of this year.
I don't know if Mike will bring out an Eagle or Omni VII again. The eagle has
a good noise blanker, the OM7 has a DSP blanker, but it has been improved in
firmware for use near electrical fences; still not as good as older technology
though.
Ones step forward, two steps back! (hi)
73
Rick
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Dukes HiFi
Sent: Thursday, July 20, 2017 4:03 PM
To: Discussion of Ten-Tec Equipment
Cc: Bernie Skoch
Subject: Re: [TenTec] notch filter for Eagle?
In side-by-side comparison, an Icon IC-756 Pro2 notch filter versus an
Orion/Eagle type notch filter, using my Pro 2 manual notch filter (which also
works in CW, and is inside the AGC loop), I can hear weak but desired signals
far more easily with the otherwise inferior Pro 2 than I can with the otherwise
superior Orion/Eagle. This is especially true when the offending carrier is
keyed, since the Pro 2 receiver is not constantly adjusting gain to compensate
for the keyed offending carrier.
One can SORT of obtain similar results by turning off the AGC in the Orion/Eagle when
using the notch filter as long as you don’t need any AGC action.
Gary
On Jul 20, 2017, at 8:34 AM, Bernie Skoch via TenTec<tentec@contesting.com>
wrote:
Rick,
I do not believe I am "out in right field."
Someone commented that all Ten Tec notch filters are useless. I disagreed.
73,
Bernie
On Jul 20, 2017, at 02:30, rick@dj0ip.de<Rick@DJ0IP.de> wrote:
You guys are all out in right field.
No radio's auto notch filter works in CW mode.
They cannot distinguish between the useful tone and the disturbing tone.
And yes, in that case, a manual notch filter is indeed better, but
show me a radio built today that has one.
I find the Eagle's notch filter effective on SSB.
73
Rick, DJ0IP
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of
Bernie Skoch via TenTec
Sent: Thursday, July 20, 2017 3:21 AM
To: Discussion of Ten-Tec Equipment
Cc: Bernie Skoch; w2iy@verizon.net
Subject: Re: [TenTec] notch filter for Eagle?
"It's sort of useless, like all Ten Tec notch filters..."
I _LOVE_ my Orion II notch filter!
The automatic feature is good, but the manual one is about the best
I've ever used.
73,
Bernie
On Jul 19, 2017, at 16:33, Gary F<dukeshifi@comcast.net> wrote:
The Eagle does have a notch function. I don't recall how to activate
it
but it is in the manual.
It's sort of useless, like all Ten Tec notch filters, since it is
outside
the AGC loop, so, while it does not have the carrier, it also
attenuated your desired signal by about as much as it reduces the carrier.
The reduction to 20 watts in Tune is self-defense. Orion's do it
too. This
is to prevent the presence of full 100 watts into a mismatch. It is
good policy.
Orion's had an option in which you could press the Power button, I
believe, to get 100 watts in Tune after match had been reached.
Red arid green the A//B VFO, there really is no A or B VFO in the
traditional sense and Eagle only has one tuning knob. Therefore, the
A/B indicator serves no function in transceive operation. In split
operation, that indicator should flip when going fro RX to TX to tell
you which displayed frequency is the TX frequency.
Gary
Sent from my iPad
On Jul 19, 2017, at 3:05 PM, Michael Tortorella<w2iy@verizon.net> wrote:
Hi all, I am hearing an awful lot of steady carrier signals up here
in
the
frozen north of Downeast Maine. Most are not very strong and they go
away
when I disconnect the antenna so they are external to the radio.
Today I am chasing TR8CA on 20 CW, he is way down in the noise, and
100 Hz away from one of these carriers. Sure would be nice to have
something like a notch filter to help in situations like these but
I could not see anywhere in the manual or front panel where I could
notch the offending carrier. Is there any list wisdom on this?
On another note, I did contact service at TT last week with my
question about power out in autotune; after only a few days delay I
got an answer that the power out in autotune is 20 watts even
though the power output shown on the display is 100. This seems
not quite right from a human factors point of view, maybe there can
be a firmware fix? Also, when exchanging VFOs, the A,B labels do
not change even when the B vfo is in large type at the top of the
display. I find this confusing. OK, I guess this turned into a
longer letter about a couple of other things besides notch
filtering, so please excuse my prolixity and thank for the BW. Any
suggestions
appreciated.
Thanks and 73, Mike W2IY
---
This email has been checked for viruses by AVG.
http://www.avg.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|