Do you know that the tube is good?
-------------------
Wes Attaway (N5WA)
(318) 393-3289 - Shreveport, LA
Computer/Cellphone Forensics
AttawayForensics.com
-------------------
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Dukes HiFi
Sent: Friday, April 28, 2017 10:11 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Titan II with Russian 4CX1600 - dd response to grid
voltage
I have a Titan II, with a just-completed Russian 4CX1600 tube installation.
It generally works, produces significant output.
However, even at standby the plate current is about 600 mA and DROPS
slightly when I key the amp.
The amp IS keying properly as I can hear the relay.
Screen current remains within limits when driven to about 1000 watts output.
So does the grid current.
Grid voltage in standby is ~-100 V, ~-60 when keyed.
Screen voltage is always 300 Volts when in Operate mode, keyed or unkeyed.
Anyone seen this happen before?
Gary
W0DVN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|