Tom,
While many of the parts are off-the-shelf, certain parts are "unobtainium" -
in particular, the bandpass filter transformers which are described in the
manual as "over-coupled" and thus not easily duplicated. Copies of the
modification instructions are probably out there, but it might take some
patient searching. The easiest way to possibly get the parts might be if you
could find an 80712 BPF board from a basket case Omni-C as it came with the
WARC bands installed; the "C" appears as if it may use the same "mission
critical" parts even though the BPF board layout is different.
Keep us posted concerning what you come up with.
73 es GL, Al
On Sat February 11 2017 3:56:42 pm tfr001@myfairpoint.net wrote:
> I know there were a couple of WARC mods available for the Omni D. Can you
> still buy the parts? If not, does anyone have details of what is
> involved... like the instruction sheet from TenTec? Schematics would be
> helpful. This rig isn't difficult to work on, so maybe I could come up with
> something. 73,
> -Tom N1OOQ
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|