I have copies of all the Orion-1 updates. Counting the original v1.2 there
are 13 files.
I don't know why anyone would want to use an old version but if you do then
contact me off-list.
-------------------
Wes Attaway (N5WA)
(318) 393-3289 - Shreveport, LA
Computer/Cellphone Forensics
AttawayForensics.com
-------------------
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Dukes HiFi
Sent: Tuesday, January 24, 2017 9:39 AM
To: Discussion of Ten-Tec Equipment
Cc: n4py3@earthlink.net
Subject: Re: [TenTec] Need Orion I Firmware
As I had mentioned last night, I had the same problem with Omni VII firmware
downloaded from TenTec.com. The ZIP file was not recognized by Windows 7 and
that was it. No joy.
Fortunately, I found the .RUF file for the 588 that was good (it unzipped
properly) and I used a copy of the Pegasus setup program to install the
588.RUF firmware into the radio. Everything worked fine.
If it is even possible to contact Ten Tec, someone should inform them that
these firmware downloads are not functional.
Gary
> On Jan 24, 2017, at 9:14 AM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:
>
> RIGHT Carl!
>
> I remember now.
> We were discussing this a year ago.
> I used to know what the "real" cause of the problem was but have long
since
> forgotton exactly what it was. It was a noisy power spike but I can't
find
> my documentation on it anymore.
>
> There is a low frequency spike proceeding the RF each time it keys. It is
a
> very short spike but enough to trigger the ARC FAULT.
>
> This spike can be eliminated by inserting a broadcast band LPF between the
> radio and the amplifier.
>
> The real cure was to insert a choke in a strategic location but I have
> forgotten exactly where. I'm sure I will stumble upon it again someday,
> somewhere.
>
> I actually still have my LPF, so I will give it a try.
>
> Darn, it's beginning to look like I have forgotten more than I ever knew.
>
> 73 - Rick, DJ0IP
> (Nr. Frankfurt, Germany)
>
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Carl
> Moreschi
> Sent: Tuesday, January 24, 2017 4:06 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Need Orion I Firmware
>
> Rick,
>
> I don't have that firmware. But I do not believe changing the FW will fix
> the problem. I believe that problem comes and goes with temperature
> variations.
>
> The fix is to get a filter to connect to the output of the Orion between
the
> Orion and Acom. I researched this last year and found a filter.
> But I sold my Acom 1000 and now use a different amp. So that fixed it for
> me.
>
> I think Barry, N1EU, has the info on the filter.
>
> Carl Moreschi N4PY
> 58 Hogwood Rd
> Louisburg, NC 27549
> www.n4py.com
>
> On 1/24/2017 9:50 AM, rick@dj0ip.de wrote:
>> We are trying to load firmware V3.025 onto an Orion 565.
>>
>> It has been running V3.032.
>>
>>
>>
>> The V3.032 runs OK when barefoot but when using an Acom amplifier, it
>> causes the ARC FAULT problem with the amp.
>>
>>
>>
>> When the radio was running V3.025 in the past years, it worked OK.
>>
>> We would like to put the old firmware back onto the radio.
>>
>>
>>
>> We have downloaded the specific firmware from the RKR site
>>
>> (http://www.rkrdesignsllc.com/support/product-documentation/product-do
>> cument ation/ten-tec-565-orion/ ) but it does not run.
>>
>>
>>
>> Other (older versions) downloaded there run OK but that specific
>> version seems to be corrupt.
>>
>>
>>
>> Does anyone have this firmware or know of another site where we can
>> download it?
>>
>>
>>
>> TNX
>>
>>
>>
>> 73
>>
>> Rick, DJ0IP
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|