Rick…
thanks for the advice.
It’s not my first rodeo, and quite aware of the voltages lurking inside.
I simply don’t like working on amplifiers.
Nothing wrong with the tubes. I put in a new trio of 811s and still have the
same issue.
power is produced, but on 20 and 15 meters, too much plate current and not
enough output.
All three 811’s plates turn nice bright red on the higher bands.
I’m suspecting a failed or failing shunt capacitors on the output.
Mike Bryce WB8VGE
prosolar@sssnet.com
> On Nov 10, 2016, at 2:46 AM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:
>
> Mike, it is most likely a tube.
>
> PLEASE TAKE ALL SAFETY PRECAUTIONS FOR WORKING WITH HIGH VOLTAGE.
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|