Re: [TenTec] Paragon is it dead?

[Stuart Rohre <rohre@arlut.utexas.edu>]

On rigs that suddenly die on the bench, check for things like a scrap of 
wire shorting out something under the chassis.
Also, check for good contact on board interconnections by removing power 
and one at a time unplug and replug interconnect cables.  Look for bent 
connector pins.
Good Luck!
Stuart
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec