TenTec
[Top] [All Lists]

Re: [TenTec] power switch for Tentec 961 power supply

To: "tentec@contesting.com" <tentec@contesting.com>
Subject: Re: [TenTec] power switch for Tentec 961 power supply
From: GARY HUBER <GLHuber@msn.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 15 Aug 2016 00:13:37 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Allan,

I have replaced the power switch in my TT-961 PS. I just checked my TT 
repairs and invoices but could not find any paperwork showing a switch 
replacement. I remember taking the switch out of the PS to get the size 
and other info and ordering a rocker switch from Mouser. (did you verify 
the power cable to your Corsair II was connected and the AF GAIN / POWER 
switch was pushed IN?)

Good Luck

73 ES DX,
Gary - AB9M

On 8/14/2016 5:24 PM, Allan Taylor wrote:
> Guys,
>
> My Tentec gear has sat for a year or two during a shack renovation. While
> trying to bring the Corsair II up recently, I
> found that the 961 power supply did nothing (nada) when toggling the power
> switch.Thinking that it is the most likely
> candidate for the problem, I wonder if any of the gang knows the mfgr and
> part number for a replacement switch.
>   (I have not contacted TT but suspect the switch is not a one off design
> for TT only!).
>
> Anyone?
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>