TenTec
[Top] [All Lists]

Re: [TenTec] OT: Simple antenna software w/impedance

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] OT: Simple antenna software w/impedance
From: Jim Allen <jim.allen@longhornband.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 18 Jul 2016 17:07:12 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
When I was doing the plotting and scheming on such a loop, I described it in a 
thread in the Antenna forum at QRZ.com.  There are several antenna geniuses 
that hang out there who love to model stuff, and apparently know what they are 
doing.

73 de W6OGC Jim Allen 

Sent from my iPad

> On Jul 18, 2016, at 16:38, Peter Klein <pklein@threshinc.com> wrote:
> 
> With all the discussion of optimum antennas and transmatches, here's a much 
> more simple but related question:
> 
> Can someone recommend a (preferably) free and reasonably simple program where 
> I could do some "what-if-ing" with a horizontal loop?
> 
> Background:  I want to set up a decent multiband antenna.  I used to have a 
> tree in which I could hang a nice 80m inverted vee at 60 feet.  It worked 
> well.  Then the tree tried to kill my house (fortunately, it missed).  So the 
> tree is now gone.  I don't have anything higher than about 30 feet now.  It 
> seems like the best antenna for me will be a horizontal loop fed with 450 or 
> 300 ohm line.  Maximum circumference will be about 220-240 feet around my 
> backyard.  Probably 30 feet high on one side and 10 feet high at the back 
> fence.  Before I start buying wire, poles, etc., I want to model a loop at 
> the various possible lengths/heights and get an idea of what the impedances, 
> reactances and angles of radiation will be on the various ham bands.
> 
> I was fooling with 4Nec2, but found it too difficult to use--it seems to 
> assume that you know everything about the minutiae of advanced, complex 
> antenna design before you start.  And trying things out led to long slowdowns 
> on my relatively recent PC.  I just want to be able to tell the program, 
> "here are the lengths of the sides, the heights, the frequency, maybe the 
> transmission line.  Now tell me the impedance, reactance, angles of 
> radiation, losses are on 80m.  Now how about on 40m, 30m, 20m, etc.?"
> 
> Thanks and 73,
> --Peter, KD7MW
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>