On 12/11/2015 1:00 PM, garyjm88@gmail.com wrote:
Intermittent tops of some of the digits go away then sometimes come back on my
corsair 2
What should I look for
I own a soldering iron
Gary j mankoff
N6biz
73
Sent from my iPhone
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
Gary,
I have seen this problem many times. In years past I spent many hours
searching for a bad solder joint. Lately I found that if I spray the
connectors on the display board headers with DE-Oxit the error goes
away. The problem was just oxidation on the pins of the headers between
the two boards that make-up the display unit. The DE-Oxit can be
purchased from All-Electronics.
Hope that helps you, 73'S
KA5SIW
> James B. Boswell JBoswell@NRAO.edu
> VLA Engineering Services Office: 575 835-7427
> National Radio Astronomy Observatory C.Phone 505 412-3732
> Post Office Box 0
> 1003 Lopezville Road
> Socorro, New Mexico 87801
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|