TenTec
[Top] [All Lists]

Re: [TenTec] Argo 6

To: wa3fiy@radioadv.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Argo 6
From: Mike Bryce <prosolar@sssnet.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 12 May 2015 11:52:31 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yes!

The radio operates at voltages lower than 12 vdc. I was one of the beta testers 
and I verified that operation was possible at low voltage i.e. lower than 13.8 
v. 

mike

Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/ <http://www.theheathkitshop.com/>
J e e p
o|||||||o 

A man with one clock knows what time it is. A man with two clocks is never 
sure. 



> On May 12, 2015, at 10:54 AM, Lee WA3FIY <wa3fiy@radioadv.com> wrote:
> 
> Interesting......
> 
> The Argonaut VI is rated to operate at 9.5 volts.  Mine works the same on 9.5 
> as 13.7 on  
> receive.  On transmit it develops a full 10 watts cw down to 11.5 volts  ... 
> 8w at 10v ... and 5w 
> at 9.5.  This is expected as the PA is seeing reduced supply voltage.  All 
> other functions 
> appear to work properly.
> 
> Something must be different there.  Hmmmmm...?
> 
> 73,
> 
> -Lee-
> 
> WA3FIY
> 
> 
> On 12 May 2015 at 6:16, Howell, D. Haney wrote:
> 
>> I, too, am very impressed and am truly enjoying this radio.  One
>> caution.  When the supply voltage from my battery drops to 12 volts,
>> the receive goes dead.  I actually sent it back to TT and there were
>> no problems.  Just the low voltage.
>> 
>> Haney
>> k2xn
>> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>