[TenTec] Omni VI+ Transmit Problem on 30 and 40 Meters

["Zskinz, Inc" <r.zoerb@live.com>]

All other bands are normal in RX and RX. On 30 and 40 Meters, the RX is normal 
but no output on transmit. The ALC light works as normal but no RF output. 

I have been looking through the Operator’s Manual for the Omni VI+ and find the 
“Low Pass Filter Board” and “Front End Board” both have some common circuitry 
for the 30 and 40 meter bands so thinking this is where to look first.  Is this 
the best approach?

Any suggestions on where to look and what to look for would be appreciated. 

73  Ron  KI0II

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec