You need to listen to any other radio when the problem occurs.
It doesn't have to be another Eagle.
It that were a known problem, there wouldn't be so many people in this
group.
73 - Rick, DJ0IP
(Nr. Frankfurt am Main)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Katz Ajamas
Sent: Monday, December 08, 2014 2:45 PM
To: tentec@contesting.com
Subject: [TenTec] Eagle noisy.
I'm still getting used to this new Eagle and there's something not right.
About 2 hours into extended CW QSO the noise floor came up. At first I
thought is was local. S5-S7 making copy difficult. I disconnected the
antenna. It's still there at S5. All bands about the same. Slightly higher
on the signal strength indicator with the NB on than with it off. Also,
slightly noisier with the attenuator on. Checked the power supply. Clean.
Tried a different one anyway. Noise still there.
Turned it off for half an hour. back on. Noise gone. Transmitted for about
ten min into dummy load. Noise did not return. There was also QSB but I
could not tell if atmospheric or in the radio.
Any known problems?
I really need to listen to another Eagle for comparison.
Thanks.
73,
-Bob
ah7i/w4
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|