*Hello Guys,*
* Wow, I just tried to get out of the shack to refill my
coffee and my head wouldn't fit through the door. Thanks for the good
words. Al, I am guessing that just sending the Regulator Board to me for
the Re-Cap job on it for the Omni 7 worked out well? How did the repair we
did for your neighbor work out? And as for Ron, we are so glad that the
Argonaut worked out so well. The biggest problem was finding the Germanium
Transistors. Bob/K4TAX, since retiring has been sending me recommendations
that are getting me about a radio or 2 a week now. And while I am breaking
several forum rules .... A great thanks to Jim Allen, out there. We have
another fellow on the hook and looking into purchasing the opt 3 Omni 6.
You guys have all been Great to work with......*
* 73 my Friends from
Wade/KJ4WS*
On Fri, Nov 7, 2014 at 10:54 AM, Al Gulseth <wb5jnc@centurytel.net> wrote:
> I second the nomination of KJ4WS.
>
> TNX/73, Al
>
> On Fri November 7 2014 9:35:09 am Ron Notarius W3WN wrote:
> > I'd start that list with Wade KJ4WS.
> >
> > Not to slight anyone else, but Wade was kind enough to do some work on my
> > Argonaut 505 and did an outstanding job on it, which the current owner of
> > that rig is still ecstatic over. (Not to worry, it went to a good home,
> > and that transaction served as part of the downpayment on my Omni VII)
> >
> > 73, ron w3wn
> >
> >
> > On 11/07/14, Barry N1EU wrote:
> >
> > I would look for other options - 3rd party service. I believe there are
> > some guys on this list who would service your rig and that is probably
> the
> > best option.
> >
> > It might be a good idea for us to collectively compile a list of those
> > folks.
> >
> > 73, Barry N1EU
> >
> > On Fri, Nov 7, 2014 at 3:08 PM, <wt4t@reagan.com> wrote:
> > > When I wrote my original e mail about ten tec being unable to repair
> the
> > > noisy mixer board on my OMNI-VI, I think the point of the e mail was
> > > lost. I do not have the bench or the test gear any longer to trouble
> > > shoot the board. My question is: If I was able to find a working
> normally
> > > mixer board,lets say pull from a parts rig,could I sub that board into
> my
> > > OMNI VI and not require any additional work ,such as realignment etc
> and
> > > have the board work like it should. Tem tec made no comment on what pat
> > > or parts that could no longer get. I will call then and ask for details
> > > on which parts it was.
> > > Using Wade's list it sure looks like all the parts could be gotten
> > > somewhere,but as I said I don't have a good enough bench to be able to
> > > trouble shoot the board to find out what the noise source is and
> correct
> > > it. Is there anyone out there that could repair the mixer board ,other
> > > then ten tec. Sure hate to dump a beautiful rig like the OMNI-VI for a
> > > 5.00 part. 73
> > > dale wt4t
> > >
> > > -----Original Message-----
> > > From: "Wade Staggs" <tvman1954@gmail.com>
> > > Sent: Thursday, November 6, 2014 11:52pm
> > > To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> > > Subject: Re: [TenTec] can't service the omni-VI mixer
> > >
> > > *Hello Ralph,*
> > > * You couldn't have said that any better as far as
> > > I am concerned. I love my Ten Tec Radios and really enjoy operating
> them.
> > > Today I replaced two Relays in the Low Pass Filter Board of a Friends
> > > Jupiter. The layout is simple. There is plenty of room inside to work
> on
> > > them and the Glass Epoxy Circuit Boards are the Highest Quality. The
> > > Relays from Ten Tec, cost a whopping $3.00 each. Gary, at Ten Tec
> advised
> > > that we replace all 14 relays but we convinced him that this operator
> > > never leaves 75/80 Meters hi .. hi .. Well, we can't guess at the cost
> of
> > > these relays if they had been for an KenYaeCom Rig but, can promise
> they
> > > would have cost More than $3.00 each..... Ten Tec Factory Service and
> the
> > > Ten Tec Receivers are Legendary and we have never heard a Ten Tec that
> > > sounded Bad On the Air. I became hooked on Ten Tec when we got the
> > > Paragon 585 .... And today we fell in love with the Jupiter all over
> > > again. We are hoping for an Eagle soon and an Omni 7 would make a lot
> of
> > > dreams come true. *
> > >
> > > * 73 to
> > > All from Wade/KJ4WS*
> > >
> > > On Thu, Nov 6, 2014 at 7:48 PM, Ralph Arnold <rea.papaof10@gmail.com>
> > >
> > > wrote:
> > > > That sounds like some excelent advice. I'm an old NAVY trained
> Aviation
> > > > Electronics Tech Radio Communications been repairing radios for
> almost
> > >
> > > 50
> > >
> > > > yrs I've had a lot of radios over the years That I managed to keep
> > > > working A couple years ago I stopped at the TenTec factory an was
> > >
> > > really
> > >
> > > > impressed with their line of radios. They are made like a Mercedes
> > >
> > > simple
> > >
> > > > ,reliable, good engineering, and most of all repairable. I have
> several
> > > > older TT radios that enjoy in my retirement. Feels good knowing that
> I
> > > > got a shot at fixing them RS parts. HiHi Enough of my rambling just
> had
> > >
> > > to
> > >
> > > > throw in my 2 cents worth. 73 KD8BTQ rALPH
> > > >
> > > > On Thu, Nov 6, 2014 at 5:23 PM, Stuart Rohre <rohre@arlut.utexas.edu
> >
> > > >
> > > > wrote:
> > > > > NTE and other cross reference general replacement semiconductor
> > >
> > > companies
> > >
> > > > > should have crosses to the MPS devices. Don't overlook Mouser,
> > > > > distributor. They have vast stocks and fast service at reasonable
> > > >
> > > > prices.
> > > >
> > > > > There are still surplus electronics places like Electronic Goldmine
> > >
> > > that
> > >
> > > > > often have out of production items.
> > > > >
> > > > > Substituting bipolar transistors really comes down to getting the
> > > > > right polarity, NPN or PNP and other major parameters. A current
> > > > > rating and voltage rating close to the original, and frequency
> cutoff
> > > > > similar to
> > >
> > > the
> > >
> > > > > original, or higher than the application you are replacing. Get the
> > >
> > > Beta
> > >
> > > > > as close as you can, but remember, there are wide ranges of beta
> that
> > >
> > > can
> > >
> > > > > do the job. The mixer may not be a high gain stage, due to its
> > >
> > > intended
> > >
> > > > > function. Most cases of abnormal noise would not be in the active
> > > >
> > > > devices,
> > > >
> > > > > (transistors) but in connections, or in faulty passive components,
> > > > > resistors, capacitors, and other such components.
> > > > > A rebuilt mixer board that is close to the original, is better
> than a
> > >
> > > non
> > >
> > > > > working mixer in a radio just sitting on a shelf.
> > > > >
> > > > > Don't overlook loose plug in connections from the board to the
> > > > > motherboard. Sometimes connectors may wear to cause intermittent
> > >
> > > noise.
> > >
> > > > > The wiggle test helps here. If wiggling something causes a noise,
> > > > > look closely at what moved. Don't be too agressive, but the more
> > > > > experience
> > > >
> > > > you
> > > >
> > > > > get with troubleshooting, the better your "touch" will be at
> finding
> > > > > causes of small problems.
> > > > >
> > > > > -Stuart
> > > > > K5KVH
> > > > >
> > > > > _______________________________________________
> > > > > TenTec mailing list
> > > > > TenTec@contesting.com
> > > > > http://lists.contesting.com/mailman/listinfo/tentec
> > > >
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|