Rick,
I went through many of the same challenges that you did... Thanks for providing
helpful info.
73
-Eric
W9WLW
> On Sep 7, 2014, at 11:44 AM, "'Rick - DJ0IP / NJ0IP' Rick@dj0ip.de
> [TenTec_Eagle]" <TenTec_Eagle@yahoogroups.com> wrote:
>
> I know this is way off topic but perhaps it will help others wanting to
> program their new Chinese dual-band handheld FM radio.
>
> I own a Baofeng UV-5R and a Wouxon KG-UVD1P, neither of which has ever had
> any useful channels programmed in.
> I decided to finally address this.
>
> As it turns out, it is very easy, just a bit tedious typing in all of the
> channel/frequency information.
>
> Slight correction: it is easy now, after spending 3 full days trying 3
> different programming cables, 4 different programming software packages and
> half a dozen or more cable drivers. For me it is now easy.
>
> AND I decided to create a web page showing how to do this.
> It evolved into 5 pages, but as I said, totally easy, just tedious.
>
> Shortcut: if you can find someone else's .CSV file and start with it, you
> will only have to modify a few channels and you'll be in business.
> Unfortunately Region One has different repeater channels than Region Two, so
> unless you live in Europe, you cannot use my file.
>
> Here is the link: http://www.dj0ip.de/chinese-handhelds/
>
> 73 - Rick, DJ0IP
> (Nr. Frankfurt am Main)
>
> __._,_.___
> Posted by: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
> Reply via web post • Reply to sender • Reply to group
> • Start a New Topic • Messages in this topic (1)
> VISIT YOUR GROUP New Members 4
> • Privacy • Unsubscribe • Terms of Use
> .
>
>
> __,_._,___
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|