Re: [TenTec] 318

["Bob McGraw - K4TAX" <RMcGraw@Blomand.net>]

If you go to the Download menu on the Tentec website and then to Accessory 
Downloads you will find the 318 near the bottom. There is a link to the 
right of the picture that says "instruction sheet" this  brings up the 
documentation.
https://www.tentec.com/content/downloads/manuals/318/318%20Instruction%20Sheet.pdf

This is the complete package.


73
Bob, K4TAX



----- Original Message ----- 
From: "John Farler" <k4avx1@windstream.net>
To: <tentec@contesting.com>
Sent: Thursday, July 31, 2014 4:09 PM
Subject: Re: [TenTec] 318


> Don't see a manual or description of the 318 amp keyer on the TT site.
> Does anyone have a maual they could share via email.  Shouldn't be too
> large.
> Have one of Mike's Amp Keyers to be given to me, so want to take a look
> at the TT one, also.
>
> Got the Eagle on the air this week during the ARRL W1AW/4 as  a host
> station and sure love my old TT Omni VI+ with the Hercules back from
> the factory, but when I tried 30 M with the VI+, I have a chirp. No, not
> the amps' fault.  Works fine on other bands.
>
> So had to use the Eagle with 15 minutes of manual study, and it
> wasn't that hard.  Worked great on 30 - Had no problems.  As Rick said,
> great RX.  Beats the VI+ in the crowds, it seems from my little 
> experience.
> Any idea about chirp on 30 M only?  Gonna put it on a dummy load first
> to check if the jumper and switch mess might be causing some problems.
>
> John, K4AVX
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec