For no particular reason or explanation, I would suggest you perform a
Master Reset. From that point, you will need to visit the CONFIG menu to
enter and activate the correct items based on your exact configuration.
Once done, all should be well.
As a general point. Always bring the power supply up or turn on first and
then turn on the radio. Reverse the steps when shutting things down. It is
the safe computer way of doing things.
73
Bob, K4TAX
DISCLOSURE:
This is to inform all persons, I am a Tentec Ambassador and I receive
compensation according to the Tentec Ambassador program. In addition, I
serve as a volunteer beta test person to Tentec for the Omni VII, Eagle
and Argonaut VI radios. I hold no employment relationship, no financial
interests nor do I conduct any commercial business, direct or indirect,
with Tentec.
----- Original Message -----
From: "John Mendenhall via TenTec" <tentec@contesting.com>
To: <tentec@contesting.com>
Sent: Thursday, July 31, 2014 1:03 PM
Subject: [TenTec] Eagle
Got mine on 7/30. Powered up this am. No rx audio, tuner would
continuously tune into a dummy load when commanded. Went into the
configuration menu to verify every everything as soon as I went out of the
configuration menu had rx audio, beeps on button pushes, and antenna tuner
now works ? Just a heads up!
73 john
Sent from my iPad
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|