Thanks, Lee.
I talked to Tentec this morning and they suggested that as well. I ordered the
new battery.
Thanks!
Bernie
-----Original Message-----
From: Lee WA3FIY <wa3fiy@radioadv.com>
To: Bernie Skoch <k5xs@aol.com>; Discussion of Ten-Tec Equipment
<tentec@contesting.com>
Sent: Tue, Jul 1, 2014 12:37 pm
Subject: Re: [TenTec] Orion II Power Up Problem
How about the memory battery? A new battery in my Orion Classic cured a number
of
strange happenings.
73,
-Lee-
WA3FIY
On 30 Jun 2014 at 20:11, Bernie Skoch via TenTec wrote:
> I have searched the archives (admitedly briefly) and haven't found
> this problem.
>
>
> On power-up the first thing in the morning or after an extended
> power-off, everything boots normally, but the sweep shows no signals
> and the receiver is deaf. But with 100% reliability, a power-off
> followed by a second power-on makes everything perfect.
>
>
> This seems to have coincided with my loading version 3.033xd firmware
> a few weeks ago (yes, I am a late adopter), but I can't swear to it.
>
>
> The symptoms seem similar to the A9 power distribution board issue I
> have read about, but not quite.
>
>
> Does anyone have any experience with a similar problem?
>
>
> Thanks for any hints before I call Ten Tec.
>
>
> 73,
> Bernie
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|