On 5/8/2014 3:24 PM, Spencer wrote:
Ferrite chokes on the coax and power leads eliminated the problem.
I had to cycle the power switch. I believe there is a
firmware/software glitch.
No -- it is almost certainly a Pin One Problem. I don't know how they
are building them now, but my Omni V had Pin One Problems at all the
connectors on the back panel. Didn't check the mic connector. Pin One
Problems are the #1 cause of hum, buzz, and RFI, including "RF in the
shack. If ferrite chokes fix it, it IS a Pin One Problem.
See k9yc.com/publish.htm for lots of tutorial stuff about it.
73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|