TenTec
[Top] [All Lists]

Re: [TenTec] Eagle problem?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Eagle problem?
From: Cecil <chacuff@cableone.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 8 May 2014 14:31:05 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I'm curious what mode he is running...I wouldn't expect that with one if the 
intermittent modes...but with AM, RTTY, or one of the digital modes sounds like 
he might be hitting a duty cycle limit.  Hope it's out where it can breath as 
well and not mounted in a hole up In a cabinet.

So many variables...

Either way I wouldn't keep it if it didn't meet his expectations or operating 
style.  I would be interested in what other radios he has used in the same way 
that don't have the heating issue.

Cecil
K5DL

Sent from my iPad

> On May 8, 2014, at 2:06 PM, GARY HUBER <glhuber@msn.com> wrote:
> 
> A local amateur recently chose to take a new Eagle on the 30 day evaluation 
> plan. He likes the receiver but has had problems with the transmitter (after 
> a few minutes on transmit the cooling fans spool up and the radio shuts 
> down).  He communicated with Ten-Tec Service, followed instructions for 
> power, grounding, etc. but was unable to resolve the TX shutdown problem. The 
> Eagle was sent back to Ten-Tec for service, but upon return it appears to 
> have the same problems as before. I saw the Eagle and a disappointed customer 
> this morning. He is at or near the 30 day mark of the evaluation and is 
> troubling over a decision of returning the Eagle Friday morning to get his 
> money back or buying a radio with an apparent problem. 
> 
> I have no skin in this game. I am a Ten-Tec Ambassador but to the best of my 
> knowledge, I have not been identified as such for this Eagle and will not 
> benefit one way or another. I am however a long time owner, user, and 
> proponent of Ten-Tec products and see the possibility of disappointed and 
> dissatisfied customer as the result of misunderstanding or miscommunication. 
> Any positive suggestions to solve this problem for a friend is greatly 
> appreciated.
> 
> 73 & DX,
> Gary - AB9M
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>