TenTec
[Top] [All Lists]

[TenTec] Wish List for ORION-III

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: [TenTec] Wish List for ORION-III
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 8 Apr 2014 13:38:38 +0200
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I hope Barry is right.

 

Although we've been through all of this before, we are all a bit farther
down the road than we were a year ago.

 

I don't have much use for a band scope, but understand and accept that it is
a very necessary option for many, perhaps most.  However, IMO, if you want
to keep the size of the radio to a decent size, similar to the OMNI VII,
then there isn't enough room for a big screen AND the rest of the info that
needs to be displayed.  There is no sense in having a tiny (useless) display
like on the FTdx-5000.

 

FEATURES:

.        Modular design with a low entry-level price  (like the K3)

.        Optional 2nd RX

.        Optional External Pan-Adapter (like the K3)

.        IF output wired to the back panel for d-i-y SDR Pan-Adapters

.        DOWNWARD CONVERSION first IF

.        Room for ALL roofing filter options (15/6/2.4 kHz + 600/300 Hz).

.        Decent sized S-Meter that older OM's can read

.        Bright WARNING when in SPLIT mode.

.        Dual Keying circuits (2-cable loop, and AMP Key with menu
adjustable lead and hang times)

.        ALL Amp keying connections utilize RCA Phono (NOT DIN).

.        Separate RF and AF Gain Controls

.        Separate RIT Knob (not multi knob)

.        RX LINE OUT/IN for pre-selector or Noise Canceller

.        EXT RX ANT line with its own reed relay to remove it and ground the
RX antenna in TX mode

.        OPTIONAL ATU with memory;  SWR 10:1

.        Final Amp rated for full power at SWR of 3:1 (at least)- probably
means using 24 or 48v FETS.

.        QUIET FAN - I like the external fan solution of the OM7 and OR.

.        CAT Interface:  if and only if we can get Alex to write an Omni-Rig
driver, I prefer USB.  If not, then RS-232.

.        NIC interface (for remoting)

.        IMO, I like lighter colors like the OM6.  Easier to read labels
than on the black panels.

.        Orange Dot  ;-)

.        I'm sure there are some needs for the guys working digital modes,
but I will let them define that.

 

I think the "modular" is important.

People can buy and pay for the options the like and need.

Also, people can buy a base model earlier, and expand over a year or two. 

 

73 - Rick, DJ0IP

(Nr. Frankfurt am Main)

 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>