Many thanks for the reply Doug. It just sounded too good to be true,
but a good thought at the time.
John de VK2XGJ
Thou shall not weigh more than thine refrigerator!
-----Original Message-----
From: Douglas
Sent: Saturday, September 14, 2013 4:00 PM
To: tentec@contesting.com
Subject: Re: [TenTec] TT Scout module mods
Date: Fri, 13 Sep 2013 13:43:36 +1000
From: "John Simon" <jrsimon@ozemail.com.au>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: [TenTec] TT Scout module mods.
Message-ID: <D7296365FEC94AFA8E05350965687577@Stinky>
Over the last couple of years I've been interested in the LF/MF section of
Amateur Radio on the reception side. I am now starting to get interested
in the TX side and having no transmitter I was wondering;
I have a TT Scout with all modules with the exception of the 160 m one.
And seeing that to change QRG bands you simply change a module to
accomplish
this.
Could one of these modules be modified to transmit in the 475 KHz band?
Are there any circuit to do this?
Many thanks.
John de VK2XGJ
I try to act normal, but I get bored
and go back to just being me!
-------------------------------------
You probably could modify a module for the new LF 475KHz band.
That won't offer you much help.
I'm sure the final amplifier stage, among other stages in the radio,
wouldn't be able to pass 475KHz. The passband filters probably start cutting
off the signals below around 1400KHz. Anything below that would never be
transmitted without extensive reworking of the radio.
73,
Doug/WA1TUT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|