thank you, I have learned that the OTHER menu item on the Orion allows for
LOW MEDIUM HIGH. I will try that first.
jack ak7o
-----Original Message-----
From: Michael Cheponis
Sent: Saturday, December 15, 2012 7:37 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] audio from the I/O connection at the back of the Orion
On Sat, Dec 15, 2012 at 10:34 AM, jack <jfriend31@comcast.net> wrote:
Question: is there a way to turn down the audio gain from the I/O DIN
connection on the back the Orion?
As far as I am aware, no.
But it's easy to add an in-line pad to drop the output down to whatever you
need - just a simple voltage divider (two resistors) will do.
I think it's actually a feature that the audio level coming out the back is
not affected by the front panel knobs.
The feature I don't like on the O2 is, for some reason, you don't get
stereo out the back (that is, both receivers). On the 565, you did.
Mike
I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which
feeds the audio thru to headphones. turning down the main and sub AF gain
does NOTHING to the I/O gain thru the DIN connector.
there is much too much volume in the headphones. the output is so loud
thru the SO2R box that I can use the headphones as a speakers. in fact
right now I am listening without problem to a CW chat on 17 meters with
the
headphones on the desk.
thanks,
jack
ak7o
______________________________**_________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/**mailman/listinfo/tentec<http://lists.contesting.com/mailman/listinfo/tentec>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|