*And that is why Paul Clinton is my HERO. I never thought to look for the
simple. Just jumped to something Bad and Harder to fix.. Thanks again to
Paul.............*
*
Wade/KJ4WS*
On Sat, Nov 17, 2012 at 5:35 AM, Vic Klein <vhklein@ptd.net> wrote:
> Bingo! Paul Clinton at Ten Tec emailed me the next morning after I had
> posted the problem and suggested the same thing. He pointed out that the
> SWR
> detection is the last thing in the Paragon before the antenna connector, so
> it was unlikely anything before that. I swapped out the old coax jumper
> and,
> so far, no more problems. Wiggling the older coax shows something has
> happened there, but that was intermittent enough that it confused me.
> Thanks
> for the many suggestions about what to look for.
>
> =Vic=
> WA4THR
>
>
> ----------------------------------------------------------------------------
> ---------------------------------
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] Paragon output problem
> From: "James C. Owen, III" <k4cgy_list@yahoo.com>
> Reply-to: "James C. Owen, III" <k4cgy_list@yahoo.com>, Discussion of
> Ten-Tec
> Equipment <tentec@contesting.com>
> Date: Thu, 15 Nov 2012 19:03:19 -0800 (PST)
> List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
>
> Sounds like a bad piece of coax from the rig to the external SWR indicator
> or
> tuner. Could also be a bad connection or component in the output circuit of
> the
> transmitter.
> 73 Jim K4CGY
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|