Good; did you get your other problem sorted, the missing 13v on the back
panel?
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Stephen Roberts
Sent: Sunday, April 08, 2012 2:29 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Headphone impedence
Yes...volume was VERY loud. I cheated and bought a Koss headphone volume
control. All is well now and it's great to have an additional volume control
for those very loud sigs.
Steve
On Apr 7, 2012, at 7:55 PM, Rick - DJ0IP / NJ0IP wrote:
> Barry, the problem with low impedance headphones is not what it sounds
like.
> ALL headphones, any impedance, sound OK.
>
> The problem is, with low impedance headphones, the volume is so loud,
> it bursts your ear drumns, and the volume control is very sensitive to
adjust.
> To counter that, a very simple attenuator can be built using just two
> resistors.
>
> What I don't know (sri, no experience) is how headphones with 64 Ohms
> perform.
> They are probably OK and your suggestion to just plug them in and see
> is very good.
>
> Worst case, Steve will have to spend 50 cents on two resistors!
>
> STEVE, PLEASE SHARE YOUR RESULTS WITH US.
>
> 73
> Rick, DJ0IP
>
>
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]
> On Behalf Of Barry N1EU
> Sent: Saturday, April 07, 2012 5:46 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Headphone impedence
>
> What does it sound like if you just plug them in?
>
> Barry N1EU
>
> On Sat, Apr 7, 2012 at 3:34 PM, Stephen Roberts
> <steverob@shoreham.net>wrote:
>
>> HD280 Pro
>>
>>
>> On Apr 7, 2012, at 10:45 AM, Rick - DJ0IP / NJ0IP wrote:
>>
>>> Steve, which Sennheiser headphones do you have.
>>> Sennheiser makes about 25 different models.
>>>
>>> 73,
>>> Rick, DJ0IP
>>>
>>> -----Original Message-----
>>> From: tentec-bounces@contesting.com [mailto:
>> tentec-bounces@contesting.com]
>>> On Behalf Of Stephen Roberts
>>> Sent: Saturday, April 07, 2012 3:17 PM
>>> To: Discussion of Ten-Tec Equipment
>>> Subject: [TenTec] Headphone impedence
>>>
>>> 525 1/4" to new Sennheiser headphones. Do I need to do anything special?
>>>
>>> Steve Roberts
>>> Steverob@shoreham.met
>>> 802.779.7489
>>>
>>> Sent from my iPhone
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> Stephen Roberts
>> Marketing Manager
>> Timberwolf Manufacturing
>>
>> marketing@timberwolfcorp.com
>> http://www.timberwolfcorp.com
>> twitter.com/timberwolfcorp
>> youtube.com/timberwolfcorp
>>
>>
>> 802-779-7489 Cell
>> 866-616-7969 Fax
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
Stephen Roberts
Marketing Manager
Timberwolf Manufacturing
marketing@timberwolfcorp.com
http://www.timberwolfcorp.com
twitter.com/timberwolfcorp
youtube.com/timberwolfcorp
802-779-7489 Cell
866-616-7969 Fax
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|