Two glitches I observe:
(1) Sometimes, more often than not, when I turn on power the S meter is
active indicating signals but the audio is mute for some delay, varies
from
fraction of second to seconds
(2) During a recent ssb QSO the receive would not always come back to
level
it was before transmitting. Keying the PTT will bring it back.
Any suggestions or "yeah it does that" always appreciated
Paul K0UYA HI Paul,I had the same problem with #1. The fix for our club Omni
VI was to replace C16 (10uf) across pins 2 and 4 of U23 on the logic board. 73,
Wayne N2WK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|