If I'm understanding your question;
I found the BEST (for me) was to first set the RF Gain fully counter-clock
wise (minimum setting), then set the AF Gain to full clock-wise (or nearly
so) then increase Clock-wise the RF Gain to set the audio level.
73 ES DX,
Gary -- AB9M
-----Original Message-----
From: Straate
Sent: Monday, March 19, 2012 10:00 PM
To: tentec@contesting.com
Subject: [TenTec] Corsair II RF Gain
Is there anyone out there who has a Corsair II that can give me some
information. I am looking for the setting on the RF Gain control when the
signal disappears. If you are looking at the control from the front, what
is the setting on the scale does the signal disappears? The control is wide
open at the 10 position and then you rotate counter-clockwise to reduce the
gain. Appreciate some feedback.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|