Scott, invest 20 bucks in a new digital voltmeter.
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of scottsheppard@videotron.ca
Sent: Saturday, February 18, 2012 9:56 PM
To: tentec@contesting.com
Subject: [TenTec] Some progress made! --Omni D low to no power--Crystal
Filter
I will....right now I am going to take the dog out and get some air! Even
with the rig off, and both the xtal filter and TX mixer boards removed...the
output pin on the tx mixer is common to ground--all the way to the band pass
filter...the coax on the other side of the xtal filter going to the ssb gen
board is also common to ground with the board in via the pin of the
transformer...I am going to be seeing rg-174 in my sleep! scott
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|