If my memory serves me correctly... it seems one can solve the pin 1
problem by connecting the mic ground pin and the overall ground pin on
the 8-pin mic connector - which marries the mic ground and the chassis
ground that way.
I have not found this necessary, but some microphones seem to need this
connection to the chassis ground.
As Stuart suggests, maybe adding a temporary jumper on the plug pins
will be enough to test this out before making permanent improvements.
==================== K8JHR ========================
On 1/31/2012 9:18 PM, Stuart Rohre wrote:
> The connector shell issue and grounding to chassis probably is the cure.
> Easy to try that shell grounding with a short clip lead first.
>
> From outside. GL!
> _______________________________________________
.../
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|