TenTec
[Top] [All Lists]

[TenTec] OT: EXAMPLE: Feeding a groundplane with Openwire

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: [TenTec] OT: EXAMPLE: Feeding a groundplane with Openwire
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 28 Jan 2012 12:09:37 +0100
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Sri, I forgot who originally asked the question here in the Ten-Tec group.

 

Here is a good example of feeding a ground plane with openwire, but it's not
a trap GP.

It works on all bands, 40 thru 10 meters, and has a low angle of radiation.

 

http://www.mydarc.de/dk7zb/Vertikal/tripleleg.htm 

 

When I spoke of this antenna earlier, I quoted the wrong person.

It was written by Martin, DK7ZB.

 

You will see that this is a simple, cheap, multi-band antenna which works
effectively.

You only have to be careful with the length of feedline, but that is
described on the page.

BTW, it will work on 80m too, but not as effective as on the higher bands.

 

WHAT I DON'T KNOW, is how exactly this might compare to feeding a trap
vertical (elevated and insulated from ground) with openwire feedline, which
was the original question.

 

IMHO, before I would try to feed the trap vertical with openwire, I would
take down the trap vertical, sell it, and buy a fiberglass pole and matchbox
to build something like the antenna described here.  Or else I would just
feed the trap vertical with coax and be done with it.

 

73

Rick, DJ0IP

 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] OT: EXAMPLE: Feeding a groundplane with Openwire, Rick - DJ0IP / NJ0IP <=