On 11/28/2011 03:27 PM, BUDW2GLN@aol.com wrote:
> I have a model 550 Pegasus and I am using the standard software that TenTec
> provides. I have several pieces of TenTec gear but have been spending a
> lot of time using the 550...I am fascinated with it.....
>
> I brought it up on ten meters for the first time the other day and noticed
> that I had only a couple of watts maybe 3 out on AM with the power level up
> at max. Further investigation revealed that SSB and CW output were A OK on
> all bands......BUT to achieve 25 watts AM, the 80mtr AM setting was
> normal.....40mtrs required 2/3 setting...... 20mtrs required full setting
> .....15mtrs would give out aprox 8 watts at full setting and, as I said,
> 10mtrs
> almost no output.........Any suggestions ???
>
> Thanks
>
> Bud W2GLN
Just a suggestion, but this is the software I use with my Pegasus.
> http://www.w1hkj.com/flrig-help/TT550-ops.html
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|