Yes, the front panel of the Eagle is identical in size and styling to
my HF version Argonaut V model 516. The Eagle may be slightly deeper but
does not have the heatsink on the rear as is the case with the 516, so
very little difference there. I believe the tuning knob is the same
except for the rubber ring fitted on the Eagle - I need to check that
out and perhaps get one. I had my friend's Eagle here in the station
this past week. It has a much better receiver than the Argonaut V and of
course can do 100 watts along with 6 meters and his had the ATU built-in.
Dave - W3NP
On 5/21/2011 4:37 PM, Jim WA9YSD wrote:
> The Eagle's front panel looks like the model 526 6N2 meter radio front panel
> with a couple of modifications. May even be in the same size box.
>
> http://www.tentec.com/index.php?id=360
>
>
> Stay on course, fight a good fight, and keep the faith. Jim K9TF/WA9YSD
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|