Hmmmmnnn- If you are talking about the 5 pin DIN to RCA dongle that TT
supplies with the Orion it does NOT bring out the true FSK line which is on
pin 7 of a standard 8 pin DIN. Both 5 and 8 pin DINs wil plug in OK to the
Orion socket. The 5 pins give you line in -AUX (pin 1) , line out (Pin 4)
, PTT (pin 3) and a "spare" no connection line on pin 5.
I just went thru this a few weeks ago - it would be OK with AFSK but not
true FSK so Ihad to make up a new dongle using the 8 pin DIN plug they send
with the Orion .
Maybe the SignaLink does in fact have a pin 7 , I dunno but I suspect it
will only do AFSK not true FSK ????
And 565 and 566 Orions are the same dongle/pinout.
FWIW -- Hank K7HP
----- Original Message -----
From: <wa3fiy@radioadv.com>
To: "Dave Reynolds" <dave@k6wrf.com>; "Discussion of Ten-Tec Equipment"
<tentec@contesting.com>
Sent: Friday, December 31, 2010 1:00 PM
Subject: Re: [TenTec] FS:SignaLink USB Sound Card
> Yes I understand that the O2 is an 8 pin socket. So is the Orion Classic
> which I use here in
> addition to a Pegasus, etc. The 5 pin connector on my interface plugs
> directly into the 8 pin
> socket on the Orion and works perfectly. I wasn't very clear on that
> point. sorry. Comparing
> the Pegasus, etc connector pin assignments to those of the Orion explains
> why it works.
>
> 73,
>
> -Lee-
>
> wa3fiy
>
>
> On 31 Dec 2010 at 11:32, Dave Reynolds wrote:
>
>> Hi Lee,
>> The guy that made the inquiry was asking if it would work with his
>> Orion 2 and according to the manufacturer O2 uses an 8 pin din accy
>> plug and the accy plug on my Omni 7 is a 5 pin din that I ordered when
>> I bought the SignaLink USB so that's why I told him he would need to
>> order or make the 8 pin plug also the other end is an RJ-45. Thanks
>> for the comment.
>>
>> cu es 73
>> Dave K6WRF
>> ----- Original Message -----
>> From: <wa3fiy@radioadv.com>
>> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>> Sent: Friday, December 31, 2010 10:42 AM
>> Subject: Re: [TenTec] FS:SignaLink USB Sound Card
>>
>>
>> >I and many others use the TT 5 pin accessory cable on the Orion with
>> >good success. Pins 1
>> > through 5 on the 8 pin Orion connector are the same function as
>> > other TT rigs using the 5 pin connector. I freely move my
>> > interface between Pegasus, Jupiter and Orion and I only have to
>> > change level settings somewhat.
>> >
>> > All that said, I'm not absolutely sure the O2 is identical to the
>> > Orion. If it is, you are probably good to go with the 5 pin
>> > connector.
>> >
>> > 73,
>> >
>> > -Lee-
>> >
>> > wa3fiy
>> >
>> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|