Thank You so muck, Ireally enjoy my Ten Tecs as all 3 73 Jim N7INO By the way
my Omni D which you repaired is still going strong mobile
--- On Thu, 11/11/10, Dr. Gerald N. Johnson <geraldj@weather.net> wrote:
From: Dr. Gerald N. Johnson <geraldj@weather.net>
Subject: Re: [TenTec] (no subject)
To: tentec@contesting.com
Date: Thursday, November 11, 2010, 6:30 PM
>From the on line Corsair II manual, pin 1 is audio, pin 2 is ground,
pin 3 is PTT and pin 4 is +v for electret power.
So white goes to 1, 2 gets shield, I'm not sure about black and red. But
with a model number for the TenTec microphone, there's probably a manual
on line describing their function.
73, Jerry, K0CQ
On 11/11/2010 11:22 AM, Jim Huicks wrote:
> Thanks, I also need the wiring on a Corsair 2, I have a Ten Tec base mic,
> wires sheild with white wire, and a red and a black if someone could tell me
> were they go on the mic connector. Thanks Jim
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|