Gene, I recently asked the same question and found the board at
http://home.earthlink.net/~wd7s/hv-2.htm . Its board only with a parts list and
instructions but well worth the $45 for the high quality board and the
knowledge that if you buy the good components and are careful with your
soldering, you may never have to re-cap the 425 PS again. At least that was my
motivation for my recent HV-2 purchase as my Titan PS is still delivering, but
one never knows.
73 es DX,
Gary - AB9M
-----Original Message-----
From: Gene Sochor
Sent: Wednesday, November 10, 2010 2:39 PM
To: tentec@contesting.com
Subject: [TenTec] Titan 425 PS replacement filter board
Is any list member aware of someone who provides a replacement power
supply filter board (with or without filter caps/diodes) for the
Titan 425 amplifier. I seem to recall one was available several
years ago. The original filter capacitors are still available
through TenTec or elsewhere, but not the board itself, and some
newer, more reliable caps are now on the market, probably with a
different foot print.
Thanks!
73, Gene N9SW
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|