73
N1mhc@arrl.net
Or alsirois@roadrunner.com
==========================
-----Original Message-----
From: Douglas [mailto:sparks06524@yahoo.com]
Sent: Saturday, September 04, 2010 3:34 AM
To: tentec@contesting.com
Subject: Re: [TenTec] Don't forget guys the Atlas 210-X
> Date: Thu, 2 Sep 2010 21:13:46 -0400
> From: "al sirois" <alsirois@roadrunner.com>
> Subject: Re: [TenTec] Don't forget guys the Atlas 210-X
> To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
> Message-ID: <25.A6.00327.DDB408C4@cdptpa-omtalb.mail.rr.com>
> Content-Type: text/plain;
> charset="us-ascii"
>
> They still are around and it comes with a power supply that
> looks nice on an
> end table. The rig snaps in and out easily to bring mobile.
> And that I did
> when MARS used to do CW on the 1700 nets. They are all
> solid state and not
> very large either.
> I know where they can be serviced and parts are still
> available.
>
> N1mhc@arrl.net
> Al sirois
> East Boothbay, ME
I can't agree on recommending an Atlas 210-X for a beginner, especially one
who has expressed interest in CW.
The Atlas is rather poor on CW with no breakin. Indeed one had to throw a
switch from transmit to receive on CW unless one has the optional/external
VOX accessory. There also no sidetone and the rig doesn't even cover the
full CW portions of the bands. There are also no provisions for a CW filter.
I speak from the experience as a long time owner of an Atlas 210-X.
There is an Atlas rig that if it's in good working condition would be great
for a beginner: the Atlas 350XL. It has digital readout, offset tuning,
full QSK, 150 to 200 watts output and WARC bands can easily be added. But it
is rare and quirky.
The choices from the Japanese makers or Ten-Tec would be much better.
I started as a Novice using a Hammarlund HQ-110 and a Knight T-60.
I then went up to a Hammarlund HQ170 and a Collins 32V1 that I still have.
However, such rigs as the 32V series are now collectors items, priced beyond
a beginner.
>From there I went to a Ten-Tec Triton IV (model 540) - great rig that I
kept for years. They can be bought today for around $150. If in good cndx,
they are ideal for a beginner. One can rebuild the VFO with minimal
technical experience.
73,
Doug/WA1TUT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|